Orientation dependent size effects in thermal buckling and post-buckling of nanoplates with cubic anisotropy

In this work, a continuum model is presented for size and orientation dependent thermal buckling and post-buckling of anisotropic nanoplates considering surface and bulk residual stresses. The model with von-Karman nonlinear strains and material cubic anisotropy of single crystals contains two parameters that reflect the orientation effects. Using Ritz method, closed form solutions are given for buckling temperature and post-buckling deflections. Regarding self-instability states of nanoplates and their recovering at higher temperatures, an experiment is discussed based on low pressurized membranes to verify the predictions. For simply supported nanoplates, the size effects are lowest when they are aligned in [100] direction. When the edges get clamped, the orientation dependence is ignorable and the behavior becomes symmetric about [510] axis. The surface residual stress makes drastic increase in buckling temperature of thinner nanoplates for which a minimum thickness is pointed to stay far from material softening at higher temperatures. Deflection of [100]-oriented buckled nanoplates is higher than [110] ones but this reverses at higher temperatures. The results for long nanoplates show that the buckling mode numbers are changed by orientation which is verified by FEM.     

光学低通滤波器的光学传递函数分析

光电成像系统的抽样过程会引起图像频谱在频谱空间上的多次复制,如果抽样过程不满足系统的奈奎斯特条件,相邻的频谱项就会产生混叠.光学传递函数可以反映系统中光学成像,抽样和重建等各个过程对图像信号频谱的响应.通过对使用光学低通滤波器(OLPF)光电成像系统的光学传递函数的分析,表明光学低通滤波器可以有效地限制图像的频谱宽度,使抽样满足奈奎斯特条件,达到消除频谱混叠,改善重建图像质量的目的.     

Predictability and model selection in the context of ARCH models

Most of the methods used in the ARCH literature for selecting the appropriate model are based on evaluating the ability of the models to describe the data. An alternative model selection approach is examined based on the evaluation of the predictability of the models in terms of standardized prediction errors. Copyright © 2005 John Wiley & Sons, Ltd.     

Assessing the Error Probability of the Model Selection Test

The asymptotic error probability of Linhart's model selection test isevaluated, and compared with the nominal significance level. We examine thecase where the expected discrepancies of the candidate models from the truemodel are asymptotically equal. The local alternatives method is employed inthe limiting operation of the asymptotic evaluation. Although the errorprobability under the null hypothesis is actually shown to be equal to orless than the level for most situations, intolerable violations of the errorcontrol are observed for nested models: It is often erroneously concludedthat the smaller model is significantly better than the larger model. Toprevent this violation, a modification of Linhart's test statistic isproposed. The effectiveness of the proposed test is confirmed throughtheoretical analysis and numerical simulations.     

属性区间识别理论模型研究及其应用

根据程乾生教授创立的属性识别理论模型[1] ,提出了属性测度区间的概念 ,建立了属性区间识别理论模型 ,并在自然科学学术期刊质量评价中进行了应用 .     

一类广义Bent型S-Box的构造

S-box是密码理论与实践中十分重要的一种装置 ,它的密码性能由其分量函数所决定 .于是 ,选择适当的分量函数来构造 S-box就成了一个重要的研究课题 .在一定意义上 ,Bent函数是最优良的密码函数 .本文通过函数序列半群和置换群来构造其任何非零线性组合为 Bent函数与线性函数之和的函数组 ,从而可由 Bent函数构造出具有高度非线性度和其他良好性状的 S-box     

Non-Euler–Lagrangian Pareto-optimality Conditions for Dynamic Multiple Criterion Decision Problems

In this paper the problem of verifying the Pareto-optimality of a given solution to a dynamic multiple-criterion decision (DMCD) problem is investigated. For this purpose, some new conditions are derived for Pareto-optimality of DMCD problems. In the literature, Pareto-optimality is characterized by means of Euler-Lagrangian differential equations. There exist problems in production and inventory control to which these conditions cannot be applied directly (Song 1997). Thus, it is necessary to explore new conditions for Pareto-optimality of DMCD problems. With some mild assumptions on the objective functionals, we develop necessary and/or sufficient conditions for Pareto-optimality in the sprit of optimization theory. Both linear and non-linear cases are considered.     

短脉冲载荷下金属材料的层裂破坏

 本文用点炮加载聚酯薄膜飞片撞击金属靶材料，飞片速度0.714~2.24 km/s，脉冲宽度40~80 ns，击靶压力为2.280~11.952 GPa。在回收的铝、铜和钢靶样品上观察到层裂现象。通过金相分析发现它们的破坏方式与在一般较长脉冲加载下的破坏方式相似，铝和铜以延性方式破坏；钢则以脆性方式破坏。一维和二维数值模拟结果表明通常的几种层裂判据在这个应力、应变和应变率范围内也基本上适用。     

Semidefinite optimization models for limit and shakedown analysis problems involving matrix spreads

Limit and shakedown analysis problems of Computational Mechanics lead to convex optimization problems, characterized by linear objective functions, linear equality constraints and constraints expressing the restrictions imposed by the material strength. It is shown that two important strength criteria, the Mohr–Coulomb and the Tresca criterion, can be represented as systems of semidefinite constraints, leading this way to semidefinite programming problems.